Vol.4 No.4 AA-SP8(49-50-51-52-53-54-55--56-57-58)-NT 53 -54-55 |
|||||
Academic Articles | |||||
Regular Paper | Vol.5No.1 (2013) p.42 - p.50 | ||||
Simplified Electromagnetic Inverse Analysis Technique about the Inclined Defect for Welded Zone of High Chromium Steel |
|||||
Shogo NAKASUMI 1,*, Takayuki SUZUKI 1 , Naoyuki TAKASHIMA 2 and Yuji TSUCHIDA 3 | |||||
1National Institute of Advanced Industrial Science and Technology, East 1-2-1 Namiki, Tsukuba, Ibaraki 305-8564, Japan 2University of Tsukuba, Tennodai 1-1-1, Tsukuba, Ibaraki, 305-8573, Japan 3Oita University, 700, Dannoharu, Oita-shi, Oita, 870-1192, Japan |
|||||
Abstract | |||||
A simplified technique of obtaining the shape of inclined defect at welded zone of high chromium steel was proposed. Magnetic flux leakage measurement and the inverse analysis using singular value decomposition were used. From the magnetic flux density distribution obtained under the high magnetic field, adequate defect shape was obtained without the influence of welded zone. Under the low magnetic field, adequate defect shape was obtained by subtracting the magnetic field of welded zone from measured magnetic flux distribution. | |||||
Keywords | |||||
inclined defect, magnetic flux leakage, welded zone, inverse analysis, magnetic dipole moment | |||||
Full Paper: PDF
|
|||||